Does anyone know how far the arm on the fuel shut off valve to kill the engine has to travel to completely shut off the fuel on a Yanmar 2GMF? My boat is still shrink wrapped.
Thanks
Keith
Thanks
Keith
The Fuel Shut Off Lever on Yanmar 2GMF
- Thread starter Keith13315
- Start date
its built in the injector pump and operated by the fuel shut off cable attached to the bell crank at the injector pump
Have manually used it to turn off the engine but never measured the travel. Judging from the length of the cable exposed at the control panel until the engine sputters it could be roughly around 2 inches? This is just an educated guess and I don't know how exact you need the measurement to be.
Thanks, I am trying to replace it with a solenoid. I did get a link to one that another sailor used to do the same I am trying to work out the mechanics but not able to get to the boat.
Fair Winds and Sun
Keith
Fair Winds and Sun
Keith