I have a Hunter-logo'd Tank Indicator panel on my 410 that provides readouts for the 3 water tanks and 2 waste tanks. Yesterday, I went to check the water levels and all five tanks registered FULL. That isn't possible, since I know both waste tanks and the aft water tank were empty. Last time I checked the tanks (a couple of weeks ago) the indicators worked fine. Has anybody else ever run into this? Is the master unit blown?
- Status
Same problem with the fuel gauge
We have the same problem witht he fuel gauge. It either reads full or empty - no in between. The dealer has not found the problem.
We have the same problem witht he fuel gauge. It either reads full or empty - no in between. The dealer has not found the problem.
give em a bang
not the gauge, the sensor itself. A gentle rap on the top when the tank is empty will often coax the float to slide back down to its proper level.
not the gauge, the sensor itself. A gentle rap on the top when the tank is empty will often coax the float to slide back down to its proper level.
- Status