Still leaking

[Slim]

Guys:My 1994 Hunter 26 is still doing the slow leak bit. I'm thinking about having her pulled, and asking the yard to do some re-glassing work to take care of any pin hole leaks that may be in the top side of the ballast tank. Any recos of how to tell them to do this? Is there any way to access the top of the ballas tank that's under the sole board? How about re-glassing areas under the sink or the settees?I already tried most of the remedies listed on the web sit before. Thanks, Slim

 

[Steve Dion]

You can do this too.

Slim:You can do this once it is pulled. All you need to do is get some glass mat and resin. Follow the directions and place the patch over the hole. Just be sure to mask the cabin sole area to prevent getting any resin on the soles area.

 

[Pat Hooyman]

Pulling will not help

SlimHave you found the leaks? If so you can fix them in the water. If not how will you find them?I have a H26 in the water in Kemah Booardwalk Marina for the last two years - no leaks in that time. Contact me I may be able to help. - hooyman@slb.comPat

 

[Crazy Dave Condon]

Slim

Call Hunter and ask for Gregg Emerson. Get my phone number and I will be glad to help you. I do not publish who or where I am out of respect for the forum as I am a dealer. I am the foremost knowledgable person on this boat. Between Pat and myself lets try some things but call first before pulling your boat.