specs for the cabin table

Jan 28, 2001
694
Anssi, bestvega@... To: AlbinVega@yahoogroups.comFrom: AlbinVega@yahoogroups.comDate: Thu, 10 Sep 2015 14:22:14 +0300Subject: Re: [AlbinVega] specs for the cabin table






hi again walt, I checked the delivery costs from UPS, and they seem to be somewhere around USD 140. It would make much sense for us to have the legs, so yes, we want to buy them from you. what is your e-mail address, so that I can send you my mailing address and talk about the money transfer? anssi
 
Jan 28, 2001
694
Better news from me. I checked with the post office and it will cost about $40 USD to mail the legs. Do you want the bronze bases? These screw to plywood squares which are glued to the bottom of the table. They are not the parts that are in the cabin sole (floor) which should match up with the ones in your cockpit. If you want them the postage will be around $30 USD. Say $50 for the legs and $40 for the postage or $100 for the legs and bases and $70 for the postage.For those who are following this thread the tubing looks to be 25mm. 1 inch converts to 25.4mm. I have a piece of 1 inch tubing on hand and it does not fit into the bronze pieces.Anssi, in order for this to work for you, you will have to have the table legs in the floor sockets and on line fore and aft when you attach the table to the bases.The bottom of the table also needs be on line fore and aft. But the center line needs to be a couple of inches to one side so the table can swing over one of the settees and in the other direction so it is centered between the settees.Peter the tubing is 27 inches over all with first bend at 17 inches the second bend is 4 1/2 inches from the other end of the tubing the angle. The angle of the bends looks to be around 35 to 40 degrees. I cant find my protractor at the moment.There will probably be a fee for customs but I don't imagine it will be very much. Walt S/V Lyric #120 To: AlbinVega@yahoogroups.comFrom: AlbinVega@yahoogroups.comDate: Thu, 10 Sep 2015 14:22:14 +0300Subject: Re: [AlbinVega] specs for the cabin table






hi again walt, I checked the delivery costs from UPS, and they seem to be somewhere around USD 140. It would make much sense for us to have the legs, so yes, we want to buy them from you. what is your e-mail address, so that I can send you my mailing address and talk about the money transfer? anssi