Southbound 4

Feb 28, 2013
67
Pacific Seacraft 40 Belfast
We backed out of the free slip at Elizabeth City at dawn and motored down the perfectly flat Pasquotank River which was free of duckweed. The wind started coming up (5-10 knots) as we reached the first crab pots so we killed the engine and sailed the rest of the river and across Albemarle Sound. In the afternoon the wind turned light and variable as we motored up the Alligator River, following the rhumb line rather than the crooked channel all other boats take. They all must have a draft over 8’. (No, they’re just willing victims of the tyrannical magenta line.) We spent the night, as we usually do, anchored across from Deep Point.

Along this part of the North Carolina ICW we “do the 50s,” stopping near mile posts that are multiples of 50. Norfolk is near mile 0, Elizabeth City near 50, Deep Point near 100, Campbell Creek near 150, and Beaufort near 200. From Beaufort we go offshore to Wrightsville Beach avoiding one of my least favorite sections of the ICW. North Carolina has plenty of other well protected anchorages for those not doing the 50s. There are also some fine sailing rivers that are mostly wide and straight: the Pungo, Pamlico, Bay and Neuse. There are some useful towns in addition to Elizabeth City: notably Bellhaven and Oriental. And there are several marinas that get excellent reviews though I’ve never stayed at any of them.

The offshore leg between Beaufort and Wrightsville is a long one - 68 miles. We try to leave a bit before dawn to guarantee sunlight for arrival. Heading south, we stage the night before anchored by the Coast Guard Station near the inlet. The Beaufort channel is extremely well lit, maybe overly so. There are so many flashing red and green lights that it’s best to ignore them and just follow the electronic chart until a buoy is obviously close.

We like pleasant weather for the passage and will wait a day or two if needed. We want to be in North Palm Beach on December 10 so we can afford plenty of lay days. With rain likely the next two days we’ve gone into Deaton Yacht Service near Oriental to get some help working on our Whitlock steering pedestal that has begun making some worrisome noises. I’ve lubricated everything I can find but nothing has helped. Maybe someone here can figure it out.
 
Feb 11, 2017
108
Gulfstar 47 NC
Sometimes 30 miles a day is more than enough. Get anchored, have a cocktail and enjoy the fall weather .
 

dLj

.
Mar 23, 2017
4,657
Belliure 41 Back in the Chesapeake
You ask:

"With rain likely the next two days we’ve gone into Deaton Yacht Service near Oriental to get some help working on our Whitlock steering pedestal that has begun making some worrisome noises. I’ve lubricated everything I can find but nothing has helped. Maybe someone here can figure it out."

Can you give us a bit more info about the noise?

dj
 
Feb 28, 2013
67
Pacific Seacraft 40 Belfast
The noise varies: grinding, groaning, squeaking, knocking. It's probably a bad bearing. That's a pretty big job on a Whitlock Cobra and new bearings come from England with a two week delay. I'll look for some place in Florida that can do the job and have a pair of bearings shipped there.
PS. Deacon did not charge for the time they spent. Nice place, highly recommended. Florida Rigging will do the work.
 
Last edited:

dLj

.
Mar 23, 2017
4,657
Belliure 41 Back in the Chesapeake
You have something like this? That's pretty complicated. A lot of places besides bearings that could be making those noises. Good luck and keep us posted.
Whit-lock Steering.jpg
 
Feb 28, 2013
67
Pacific Seacraft 40 Belfast
The pedestal must be removed, dealing with all those wires and cables. The arm at the bottom of the diagram is welded and must be ground off. Then it comes apart. The guy at Florida Rigging describes the job as evil.