Schematics....?

[Dodger25.5]

Hello, just bought an '85 Hunter 25.5! Yay so excited!
She needs some work though: new running rigging and a bottom job most importantly.
I'm looking for some sort of manual or diagram that tells me what size things are like: halyard size, sheet size. Also if the blocks inside the mast need replacement I want to know their size and have them ready to change out if needed. Also there is a lot of plumbing under the sink area. I want to know what all that is where it goes..... You get the point.
Also any tips on how to do a bottom job
Thanks guys
Dodger

 

[Steve Dion]

Don't expect very much with the manuals on the older boats. As for running rigging you will do best with this website. Contact the store and they have everything you need.

Many of the manual are online at the HOW site.

 

[Dave Groshong]

I'm happy to help, our Rigging Calculator will do the halyards, here's a link to that page:

http://shop.hunterowners.com/cordage/cordage.htm

Here's a link the model page of our site for the 25.5:

http://hunter.sailboatowners.com/in...&Itemid=248&task=3&kb=1&model=14&brand=Hunter

I'm happy to help if you don't find what you need.

 

[Dodger25.5]

Thank you, I am looking for something more detailed though.

Is that a refrigerator under the counter? I pulled up this square piece of counter and there is what appears to be a fridge! Hum
Dodger

 

[Canonshooternb]

I have the same boat so if there is anything that I can share please ask away but I am also new at this and have only had her for just over a year.
One suggestion is to take lots of pics, before and after to show how much hard work you will be putting into it.

 

[Mike Culik]

Great boat that I also owned for 8 years before moving up to a H31. Plumbing under the galley sink includes the supply line either manual pump or pressurized depending on the privious owner and the drain line right to the thru hull. Wellcome aboard!

Mike