Saildrive 110s workshop manual?

Status
Not open for further replies.
sailcruiser

sailcruiser

.
Sep 6, 2011
435
Hi guys, I've spent hours hunting through Volvo's site looking for any documentation on the saildrive and so far no luck. Does anyone know where I can either download or buy it? I have a 110S that needs the seals changed and a new anode for next Spring. I'm doing the oil and seals now and need to look at what parts to order. As I understand it regular engine oil is appropriate.

Any advice? SC
 
Mark Maulden

Mark Maulden

.
Jan 25, 2011
2,436
S2 11.0A Anacortes, WA
look at marinepartsexpress.com. They have the exploded diagrams with part numbers etc. I've never seen an actual workshop manual for the 110. Let me know if you find one....
 
sailcruiser

sailcruiser

.
Sep 6, 2011
435
Oh definitely on the oil. Apparently one exists but I haven't been able to put my hands on it YET. Right now the prop is being a pill to get off. The 'cone' won't budge. The prop is a right hand so a little different. Any advice? Was thinking of trying some deep creep or similar. I really don't want to pay someone to do something this silly. SC
 
D

David Cox

.
Oct 18, 2011
3
S2 8.0 Lake Monroe
As s past master of all things stuck PBS blaster agood puller )snap-on ( and a brass hammer put alot of tension on the puller a firm whack w/hammer more tension more hammer it will come off...:0)))
 
sailcruiser

sailcruiser

.
Sep 6, 2011
435
David Cox said:
As s past master of all things stuck PBS blaster agood puller )snap-on ( and a brass hammer put alot of tension on the puller a firm whack w/hammer more tension more hammer it will come off...:0)))
Click to expand
Oh tried PB Blaster, deep creep a lot of language I won't repeat, slide hammer etc. what worked was a quick propane torch and a dead blow hammer. Usually a BFH wins but I try to make it my last resort. I have a temper and the two generally don't mix well. :). SC
 
Status
Not open for further replies.

Top Bottom