B
Brad
I was wondering if anyone has experience/suggestions about getting to the packing glands on both the prop shaft and the rudder post in a 1982 Hunter 33. I can reach the rudder post from the port side quarter berth but have a tough time getting much leverage. The prop shaft and the raw water feed line under the engine seem impossible to reach. It looks like you have to either a) remove the fuel tank, b) remove the teak panel from the quarter berth side, or c) remove the water heater and possibly the holding tank to get in from the starboard side. Is there a best way? Can someone loan me a 6 year old or maybe a trained spider monkey?