Replacing H26 standing rigging - barrier coat

[tkaser3210]

Recently bought a '94 H26 that is in pretty good shape, but I am considering replacing the standing rigging for peace of mind. Any ideas what new pre-made rigging should cost?

Also need to sand and barrier coat the bottom. After reading all the posts about diy, I don't think it's a job I want to tackle. Any rough ideas what it might cost to have a yard do it? (Lake Michigan East shore)

 

[Steve Dion]

Contact Seco South in Florida and speak with John. I just had them make me new life lines. They did them for less than 50% of local riggers.

http://www.secosouth.com/

 

[DJN51]

Try Vermont Sailing partners,Ask for Bill Fastiggi .802 6557245. Does great work

 

[troutsmoustang]

I bought a 1997 H26 this year, and I am doing a bottom job myself. It is not nearly as bad as I thought that it would be. I purchased a 5" palm sander from Harbor Freight for $19.00 and started it. I live in the country and no neighbors so dust is not a problem. I also just bought Interlux 2000 for the barrier coat. Will one gallon do it? I am over half way finish with approximately 8 hours into it. A lot of great information over here about doing it. d