Replacement Mast Foot For 18'5 (1990)

[WILL/RIVERSIDE CA]

Looking for a replacement mast "foot" for a 18.5' Hunter made in 1990. Hull #HUNCO20L990 if that's any help. The mast was made in France by Z-Diffusion of La Rochelle, France; Mast Type: H-18; Reference: 3446 B1. The mast is aluminum. Also there are three pop rivets holding the mast foot on to the mast. Are those pop rivets Aluminum, Stainless Steel, or Steel? Will need three of those pop rivets too. I have provided two photo's to help in the identification. Any help in this regard will be greatly appreciated.

 

[Crazy Dave Condon]

Look at US Spars. It is all Z Spar product. They are located in the gainesville area of Florida and do have a website. You can also call them.

Crazy dave

FYI. In the 90's, Z Spar supplied all the masts to Hunter. When they decided to purchase Selden Isomat in Charlotte, NC, they shut down the plant in Florida and shifted operations to Charlotte. Only four from Florida went to charotte and the folks in Charlotte had been laid off. As a result, masts were on one of my boats 6 months late all due to the owners in France not figuring out what to do when purchasing another company. That is why Hunter went to another vendor whom they have had a good relationship with all these years.