Refitting a Hunter 25

[sharkbite]

I want to do the following to my 1979 Hunter 25 for coastal cruising. Redo the entire electrical Install two 50wt solar panels,Install USCG Water Treament System Install a through-hull for treamentInstall Dodger and BiminiPaint the hull and bottom paintNew standing & running riggingMove fresh water tank to V-berthWhat order do you think I should do them in? Currently it's in a slip, however should I do all the work on the hard? First project boat and want to go about it the right way.

 

[KennyH]

here is the order

I have an 81 25 so here is the order I would do them in: 1. standing and running rigging done while boat is in the water. Boat Shape changes out of water and easier to get it right the first time. 2. Redo electrical and add solar panels. Still best done while boat is in the water. 3. Install dodger and bimini. You will love having a bimini and can see exactly how both will work and effect your views while in the water. 4. Water tank, water system etc done first at haul out. 5. Paint hull and bottom before launch.

 

[sharkbite]

Thank you

Thank you for the advice, we're going to get it started, we're doing the rigging and electrical (hired an eletrician) to redo all the wire completely, adding instruments, vhs, solar, inverter, etc.