Pump out adapter

Status
Not open for further replies.
B

BRIAN OCONNOR

.
Sep 25, 2008
7
Hunter 31 Port Jefferson, NY
I am looking for some HELP , I cannot find a PUMP-OUT adapter for my Hunter-31' holding tank. The adapter is not the screw in type (like a light bulb) it is only a half turn locking type (kind of like the lid on a jar).

Capt. Brian
Long Island, N.Y.
 
S

Steve Dion

.
Dec 2, 1999
15,184
Hunter Vision-36 Rio Vista, CA.
Brian:

I do not think that they make an adapter for that type of cap. You will probably need to have the tapered rubber ones.

If you change out the deck fitting, there were two different ones that I know about and it was basically the different thread configuration.
 
Claude L.-Auger

Claude L.-Auger

.
Dec 14, 2003
1,432
Hunter 34 Lake of Two Mountains, QC, Can
Have never seen one. Worst yet marinas are not going to be able to pump you out as few have the rubber adapter that Steve is talking about. If it was my boat, I would change the fitting for one with 1 & 1/2" threads. Most places have the adapter as shown on pix and can easily pump you out if your deck fitting has the same threads. You can also find 1 & 1/4" fittings but I had that on a previous boat and had to make my own adapter to go from 1 & 1/4 to 1 & 1/2". Good luck
 
Status
Not open for further replies.

Top Bottom