plumbing diagram right?

[Jared1048]

So i ripped out all the old and now I'm trying to figure out how the new stuff goes in.

I've attached a diagram of how I think it goes.

[corrected link- thanks steve]
http://imageshack.us/photo/my-images/31/wp000349.jpg/


Thanks!
-Jared

 

[Don S/V ILLusion]

link doesn't work

 

[Steve Dion]

Try this:

http://imageshack.us/photo/my-images/31/wp000349.jpg/

 

[Steve Dion]

Jared:

If you look in the West Marine Catalog they had a few differet ways to plumb the toilet. The "preferred" method puts everything in the holding tank and then it can be discharged over-board or pumped out a pump out station.

 

[Squidd]

I didn't see a vent....

 

[Jared1048]

Thanks for the quick reply guys.

The vent isnt listed in the diagram as its easy to follow. Good catch though.

I looked at the west marine diagrams but they dont have the manual pump in any of them.

One of my biggest concerns is where the anti siphen goes. If I remember correctly it was after the switch valve going down to the thru hull to prevent water from coming back into the toilet.

 

[redhead78]

While u guys are on this I am doing the same job, I see a filter thats rather pricey, for the vent, is this necessary, how much?

 

[Steve Dion]

Don Casey has some examples too, courtesy of BoatUS.

http://www.boatus.com/boattech/casey/13.htm

 

[Steve Dion]

I don't think filters are a good idea. IF you over fill you tank there is a good chance that they filter will get clogged and you tank may have an issue when you try to remove the cap to pump out (like a pressurized poop coffin). <g>

 

[Jared1048]

so frustrating. I can find diagrams all day long but none that match whats been installed on my boat. Seams like it would be a common thing. holding tank, manual pumpout, deck pumpout, 1 anti ciphen tube and 1 y valve.

new diagram
http://img688.imageshack.us/img688/826/wp000352.jpg