When I bought my 94 Hunter Vision 36 I had some missing and broken plastic lacthes that keep the inside lockers and the frig.lid closed. I need to find where to get them or who made them. The Make and part # would be a great help also. I've looked around locally but not able to locate them. Can any body help? Thanks, Larry
- Status
LATCHES
i have a 450,1999. i called eddie breaden at hunter in florida and he is a great help. if it is the same hdw as i have [wont part with the spares]hunter has them. they will probably charge you,1-800-771-5556 x3032. eddie if you are reading this and dont want me to to do this give me a grawl. mcbubba720@aol.com
i have a 450,1999. i called eddie breaden at hunter in florida and he is a great help. if it is the same hdw as i have [wont part with the spares]hunter has them. they will probably charge you,1-800-771-5556 x3032. eddie if you are reading this and dont want me to to do this give me a grawl. mcbubba720@aol.com
Call Hunter
I called Hunter and ordered them over the phone. My boat is a 97 and they sent me replacements that seem to be a slightly improved design from the originals. I bought a few extras just in case although I think these will last a lot longer than the originals. I always call Hunter first. So far I've bought various replacement valves, caps, latches etc... No guessing as to whether you're actually ordering the right parts. They know what's on your boat and so far they've never sent me a wrong part. Wish I could say the same for some of the other suppliers I've had to deal with.
I called Hunter and ordered them over the phone. My boat is a 97 and they sent me replacements that seem to be a slightly improved design from the originals. I bought a few extras just in case although I think these will last a lot longer than the originals. I always call Hunter first. So far I've bought various replacement valves, caps, latches etc... No guessing as to whether you're actually ordering the right parts. They know what's on your boat and so far they've never sent me a wrong part. Wish I could say the same for some of the other suppliers I've had to deal with.
latches
I have a 1996 Hunter and the latches are made buy Southco (not made in the USA) there are three sizes if I remember right and they have a web site (www.southco.com) There is a wholesaler in Ct. however he will only sell large numbers(min 100) Best to call Hunter! B and B Threaded Products 105 Clark St East Berlin Ct.
I have a 1996 Hunter and the latches are made buy Southco (not made in the USA) there are three sizes if I remember right and they have a web site (www.southco.com) There is a wholesaler in Ct. however he will only sell large numbers(min 100) Best to call Hunter! B and B Threaded Products 105 Clark St East Berlin Ct.
- Status