If the fittings and rigging are still OK, yo ucould just purchase a new mast extrusion fro ma local sparmaker. There are many boatbuilders, but in reality....... there are only just so many spar extrusion sizes, in other words....mast extrusions are not always brand specific. The best place to try would be a marine consignment shop, bring a short piece (6-12") of your old mast to compare and look for a piece at least as long as your mast (too long can be cut, too short is no good). Dwyer Aluminum Masts may have made your original mast (and if not.... I bet they would stil lhave the correct extrusion!) and they are located in North Branford, CT. Google Dwyer for up to date info. Rudy at D&R Mariine can sell you a new mast or again, a bare extrusion....... but he is in Assonet, MA and to tel lthe truth.... his masts come from Dwyer anyway.
