New Holding Tank for 1989 Hunter 33.5

[Ron Barrow]

Peggy, I am trying to locate a (new) holding tank to replace one from my 1989 Hunter 33.5. Dimensions are 27" long by 14" high by 9 3/4" wide. I couldn't find one on the (pretty) picture list that you faxed to me that matched or would work and provide equal or improved capacity. The width could be increased to 11 or 12 inches, but the other measurements are maximized within 1/2". Current fittings are on the end of the tank digonally opposed. They might work better on the side facing the head (shorter hose, less bending). Any suggestions?

 

[Peggie Hall/HeadMistress]

Did we send you...

a set of non-rectangular drawings, or only the list of rectangular shapes? Just because your current tank is a rectangle, very few spaces on boats are...and often a non-rectangular shape will fit the space and give you more capacity than what you're trying to replace.Or--there may be another location that will work better than where the tank is now. Shoot me an e-mail...and we'll see if we can solve your problem.

 

[Peggie Hall/HeadMistress]

Btw...

You must have missed one on the list. Your dimensions are 9 3/4 (expandable) x 14 x 27...mold # TK207016 is 10 x 14 x 27. What's wrong with that one?