Need Yanmar exhaust elbow

[DevlinMike]

I am searching for Yanmar part #129171-13550, a mixing elbow for a 3JH2-TE. I thought the hard part would be coming up with the cash for the job but once I gave the go-ahead, I was told there were no such parts in the US pipeline. There is apparently a 60-90 day wait. Any suggestions about finding one gathering dust on someone's shelf, new or lightly used?

 

[kito]

I am searching for Yanmar part #129171-13550, a mixing elbow for a 3JH2-TE. I thought the hard part would be coming up with the cash for the job but once I gave the go-ahead, I was told there were no such parts in the US pipeline. There is apparently a 60-90 day wait. Any suggestions about finding one gathering dust on someone's shelf, new or lightly used?

Have you tried this place? https://shop.toadmarinesupply.com/s...sults&pn=129171-13550&storetype=mdd&x=13&y=15

 

[DevlinMike]

Yup. Like most distributors, they don't stock infrequently ordered parts. When they went to look they found that Yanmar didn't have any in the US.

 

[Steve Dion]

Have you checked with Mack Boring? I believe they are the master distributor in your area.

 

[kloudie1]

I would guess that a good pipe fabrication shop could build one for about that price.

 

[DevlinMike]

I would guess that a good pipe fabrication shop could build one for about that price.

Thanks, that may be the way to go. I do have a couple of leads for fabricators

 

[seadaddler]

Why

What is wrong with your mixing elbo,I have had good luck cleaning mine out.
Nick

 

[DevlinMike]

What is wrong with your mixing elbo,I have had good luck cleaning mine out.
Nick

This one is rotted through. It was splashing sea water onto the turbo, causing it to freeze.

 

[NYSail]

You can clean an elbow only so many times before it is completely is gone. I'm on a 10 year replacement plan.

 

[Secfly]

I just bought one on ebay for about 150. Or so. Have it already installed.