Need to replace rear Sheaves Hunter 31 1984

Status
Not open for further replies.
R

Richard Brahs

I need to replace the two aft sheaves that my Genoa sheet feeds through. I own an 84 Hunter 31. Any suggestions, that can be used as well as new. Thank you, Richard B
 
S

Steve Dion

.
Dec 2, 1999
15,184
Hunter Vision-36 Rio Vista, CA.
Call Garhauer!

Richard: Call Garhauer Marine. Their cheek blocks are about $19 for your boat. If you can send them an old one, they can probably drill them for you bolt pattern. www.garhauermarine.com
 
T

Tom Madura

Lewmar originals

Richard, This topic has been discussed here several times; I replaced mine last year. The original foot blocks are made by Lewmar and are still available. Check the Forum Archives for the part number. As I recall they were about $60 each. Tom Madura s/v "Good Vices"
 
Status
Not open for further replies.

Top Bottom