Need information on 2006 Hunter 41DS Windows

[Jerry Clark H356 SV Persi]

There is a fellow sailor over on CruisersForum.com where I also spend some time. He has a 2006 Hunter 41DS. He has some windows leaking and is trying to find out who made them on this model. A few weeks ago, there was a post about a former Hunter employee who was available for advice on this forum. How do we get in touch with him so we can help this fellow sailor out?

Please let me know.

Thanks

 

[uncledom]

There is a big banner at the top of the page that says "1to one" Personal help. Click that.

 

[Jerry Clark H356 SV Persi]

So obvious, I should have seen it. Thanks for pointing it out.

 

[uncledom]

LOL glad to help Jerry

 

[dakno]

Those windows are made by Bomar. I tried the 1 on 1 and it was't much help but a nice try. I also tried Bomar and they attempted to help and passed me around to several people but in the end no help. My forward facing fixed salon window was cracked and leaking so I had to do something. My boat is a 2008 H41DS (2006-2014). The 5/16 acrylic is bedded in from the outside, you do not need to disassemble these frames from inside or outside. You simply cut out the old bedding from the outside, remove acrylic if necessary and clean up, then re-bed. I used the sikaflex caulk and primer.

 

[Nachismo]

3 years later, any leaks?