need help/info with my 25 Cherubini

[Cocoa Beach Sailor]

Hi, I bought a 25 that was near death and I have brought it back...except for the boom to mast joint. The boom is currently lashed around the mast and a downhaul employed. Of course it goes of center and sail shape is a joke. Can someone PLEASE take a couple of photos from different angles of their 25 or 27 mast to boom bits and post them? I need to know what to have made up at the machine shop. PM me if you wish for my email address. She is sailing and many never thought it would be so....so I am naming her Humpty Dumpty!

 

[John T1594]

You might want to give these guys a call and they may be able to identify and replace the part you need:
Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com

 

[Cocoa Beach Sailor]

thanks but likely cheaper to have it made up locally. Did you have a photo ??

 

[KennyH]

I wiill post some pictures shortly

Gllad to help. My 1981 Hunter 25 is stock and give me a few days next week and I'll have some picture to send you. I have added a boom vang but otherwise stock.

 

[Cocoa Beach Sailor]

Re: I wiill post some pictures shortly

Hey KennyH , could you post those photos of the gooseneck? Thanks much, Terry

 

[KennyH]

I hope this works and you have the pictures

I have not uploaded pictures to this site but I hope you get these pictures. Good Luck!

 

[KennyH]

trying again

Second try with pictures

 

[KennyH]

I have two jiffie reef lines which you see. Then there is a down haul line. The whole assemble moves up and down on the track. Hope this helps! Let me know if you have questions.

 

[ggrizzard]

Here's the parts you need for the gooseneck assembly made by kenyon :


http://www.rigrite.com/Spars/Kenyon_Spars/3656-boom.html#3656 Internal Outhaul Assemblies