Need drawing for H42 series 1 mid ships water tank please
- Thread starter eianm
- Start date
Eianm,
Well finally got around to testing midship water tank. Just fyi, never use 16 oz red food dye to look for leaks, still flushing red out of bilge.
How hard or what needs to be taken apart to get to tge tank if you have done yours?
Well finally got around to testing midship water tank. Just fyi, never use 16 oz red food dye to look for leaks, still flushing red out of bilge.
How hard or what needs to be taken apart to get to tge tank if you have done yours?
i reconditioned mine- there is a detailed post on that job. My tank id the original ezel aluminium tank. When i opened it , i found around 20 holes of various sizes , but was able to seal them all and resurface the tank with a food grade coating and it worked a treat- that was over a year ago and still in n100% condition. There certainly were some tricks needed to get tot he tank , but reconditioning it was WAY easier and much cheaper than replacing it- good luck- its a rewarding project!
Check out “our way too” can find on Facebook. They did complete tank replacements and documented all steps