Mounting Origo stove

[a65sailor]

I have an Origo 3000 stove with gimbals I need to mount. If any one has pictures of how these mount and work it would be helpful. Thanks

 

[Bill Roosa]

foremost you have to have a place for the stove that allows the gimbals to work during a heel. not very useful if they only work during pitching motion. The gimbal male parts are mounted to a bulk head or cabinet and the female parts attach to them. There are LOTS of clearance issues and also the mater of locking the stove so it does not gimble when you don't want it to.
Did you try google

 

[a65sailor]

The clearance is not an issue. I have an H34 that PO removed the kerosine stove from. I bought this stove used to avoid pressurized gas. I have not found a lot of good info on the net.

 

[MrUnix]

Have you checked the manual? It has mounting instructions and clearances for the 1500, 3000 and 6x00 series stoves. If you don't have a copy, one can be found here:

http://www.mrunix.net/h23/docs/origo1500.pdf

Cheers,
Brad

PS: I have both the 1500 and 3000 models, but no gimbals :cry:

 

[a65sailor]

Thank you! I had not found that document.