mixing elbow

Status
Not open for further replies.
rtmccue

rtmccue

.
Jun 5, 2004
138
HUNTER 450 Rockhall MD
Im trying to replace the mixing elbow on my 1997 376. 3JH2E the inlet fitting is too small does any one know the part #.
 
S

Steve Dion

.
Dec 2, 1999
15,184
Hunter Vision-36 Rio Vista, CA.
Not sure which part?

Rich: I have not messed with the elbow on our 3JH2E so I am not sure which part you are referring to. The 2GM had a manifold, the connector and the elbow (3 parts). The exhaust hose attached to the elbow.
 
R

Rick9619

Hey Rich. Another way to attack this is just take the whole thing off and go to your local yard. You should just be able to match it right up. Here is another thought. Get a refurbished/second. Tis just metal. Luck Cheers
 
P

Paul

Rich, The only place I found when needed a new mixing elbow that was able to help was Cobe Marine. They are located at 8938 Ft. Smallwood Rd in Pasadena, MD. Their phone # is 410-255-9488. Hope that helps. I will be in Rock Hall for the week of July 4th and stayin at Rock Hall Landing. Stop by to say hello if you are in town. Paul s/v Lady Sara Hunter Legend 37
 
Status
Not open for further replies.

Top Bottom