Mildewed Sails
- Thread starter Bobbi Ullinger
- Start date
- Status
Two ways:
1) Fire
2) Brush as much off with a soft bristle brush then soak in a tub with Clorox diluted to 30:1. Check after a while to see if it is working as some mildew may be between the layers. Afterwards, rinse really well with fresh water and allow to dry completely before folding. Not for Kevlar or Nylon (spinnaker) sails.
1) Fire
2) Brush as much off with a soft bristle brush then soak in a tub with Clorox diluted to 30:1. Check after a while to see if it is working as some mildew may be between the layers. Afterwards, rinse really well with fresh water and allow to dry completely before folding. Not for Kevlar or Nylon (spinnaker) sails.
- Status