I recall a few people asking about the bed arrangements in the main salon.
On our recently purchased pre-owned boat, there was a drawing that a past owner has made. I think its reasonably clear. The boat came with the short pole for the tabletop, The existing table top is used with some filler cushions and a 'drill kit' that we didn't find on the boat.
The instructions enclosed written by a previous owner say:
The port settee in the main cabin makes up into a 73" X 46" bed. Exchange the table leg with the shorter one, and reset the bunk straps (black) around the large port settee and take the cushion from the short seat cushion across the cabin (starboard). Fill the two remaining voids with the two triangular cushions. (see attachment for diagram of the installation).
On our recently purchased pre-owned boat, there was a drawing that a past owner has made. I think its reasonably clear. The boat came with the short pole for the tabletop, The existing table top is used with some filler cushions and a 'drill kit' that we didn't find on the boat.
The instructions enclosed written by a previous owner say:
The port settee in the main cabin makes up into a 73" X 46" bed. Exchange the table leg with the shorter one, and reset the bunk straps (black) around the large port settee and take the cushion from the short seat cushion across the cabin (starboard). Fill the two remaining voids with the two triangular cushions. (see attachment for diagram of the installation).
