mainsheet configuration

Status
Not open for further replies.
Sep 30, 2008
4
Hunter 25 Charleston, SC
Hi All,
I have a Hunter 25 sloop 1978 model. I have been working on her for a year+ now, and finally got her in the water at the marina. Big problem, I had to get all the running and standing rigging replaced. Got new bloks and all, but cannot find any spec for rigging the mainsail sheet, I have the top block and the lower block.
It does not have a traveller, which I don't like, but that is a project for another day.
Does anyone have a diagram or spec to show how to rig up the mainsheet?
Regards, and thanks.
 

Alan

.
Jun 2, 2004
4,174
Hunter 35.5 LI, NY
I thought the early 25's came with end boom sheeting and a traveler that was mounted just behind the companionway.
Can you give a description or a photo of what you have?
 
G

Guest

H25

If you check out the photo gallery (88) of your model there is one (After Wilma) that shows a good pic of how they rigged the main sheet. I would try to do it the same way as original, or as close to as possible.

Terry Cox
 
G

Guest

H25

Another good pic of the rigging on page 4 with the boat name Kismet.

Terry Cox
 
Status
Not open for further replies.