Has anyone replaced the gooseneck on the 26 D. The rivets are loose and it wobbles up and down. I know its going to bite me eventually. Also, how do you replace the outhaul line. It looks like the cap at the end of the boom is also attached with rivets. Thanks
Loose Goose Neck, worn outhaul line.
- Thread starter Tom Roberts
- Start date
- Status
So Change the Rivets
Tom, If it's as bad as you say it is, just drill out the current rivets and replace them with new tighter fitting ones. It's pretty easy to do, as long as you can get your hands on a rivet gun(most hardware stores should have them or just visit Home Depot) and a box of rivets($2). -Sean
Tom, If it's as bad as you say it is, just drill out the current rivets and replace them with new tighter fitting ones. It's pretty easy to do, as long as you can get your hands on a rivet gun(most hardware stores should have them or just visit Home Depot) and a box of rivets($2). -Sean
nice improvement
It's as easy as Sean said. You could make an inexpensive improvement to your outhaul by ordering the Blue Water Yachts kit
It's as easy as Sean said. You could make an inexpensive improvement to your outhaul by ordering the Blue Water Yachts kit
- Status