A friend of mine is looking for above steering cylinder assembly. It looks like they might have been bought out. Does anyone know where to find this. It has to be the K-1 because of the way it is mounted.
looking for Hynautic steering cylinder K-1-C
- Thread starter ChuckThomas
- Start date
- Status
Don't know if this is it but
A Kobelt 1.5" X 10' X 1500# steering cylinder is sold by Fisheries Supply in Seattle. No model is specified. You can talk with a very knowledgeable salesperson toll free at1-800-426-6930 or on your cel phone at 1-206=634-4635. Hope its what you're looking for. Joe
A Kobelt 1.5" X 10' X 1500# steering cylinder is sold by Fisheries Supply in Seattle. No model is specified. You can talk with a very knowledgeable salesperson toll free at1-800-426-6930 or on your cel phone at 1-206=634-4635. Hope its what you're looking for. Joe
hynautic
Hynautic was bought out by Teleflex. Rebuild kits are avail thru marine duistributors. I rebuild that same cyl about a year AGO. bOB
Hynautic was bought out by Teleflex. Rebuild kits are avail thru marine duistributors. I rebuild that same cyl about a year AGO. bOB
the cylinder is going to be used as a spare.
we are going to be making a passage and are looking for cylinder as a spare. the problem with using the replacement is the bolt patterns. I have tried several consignment stores.
we are going to be making a passage and are looking for cylinder as a spare. the problem with using the replacement is the bolt patterns. I have tried several consignment stores.
hynautics
A rebuild kit packs smaller than a spare cyl...never the less, try Sailorman in Ft Lauderdale. sailorman.com Bob
A rebuild kit packs smaller than a spare cyl...never the less, try Sailorman in Ft Lauderdale. sailorman.com Bob
- Status