Link 2000 amps function

R

Rodd

.
Jan 22, 2008
148
Pearson 424 East Hampton,NY
Gents-
My ancient Link 2000 has been pretty reliable for 20 something years, but recently I have an issue. I am monitoring two separate banks. voltage reading is normal for both banks; but when I read amps battery 1 is correct, but battery 2 reads 510 at all times! I can't seem to reset this function. any suggestions?
Thanks.
 
Stu Jackson

Stu Jackson

.
Feb 26, 2004
22,776
Catalina 34 224 Maple Bay, BC, Canada
Rodd said:
I can't seem to reset this function.
Click to expand
That's because that reading is not a Function.
I have a Link 2000. I also have a little known factory reset procedure that I downloaded from Xantrex/Heart decades ago; it works. If you'd like a copy, pm me and I'll get it to you. It is a much more detailed procedure than in the Link manual.
 
Last edited:
B

bittern

.
Feb 10, 2014
2
Mirage 29 Kingston, Ontario
Stu Jackson said:
That's because that reading is not a Function.
I have a Link 2000. I also have a little known factory reset procedure that I downloaded from Xantrex/Heart decades ago; it works. If you'd like a copy, pm me and I'll get it to you. It is a much more detailed procedure than in the Link manual.
Click to expand
Good morning, I also would be grateful for a copy of your download. Many thanks, Peter MacKinnon “Bittern” K8ngston Ontario
 
Maine Sail

Maine Sail

.
Feb 6, 1998
11,674
Canadian Sailcraft 36T Casco Bay, ME
Rodd said:
Gents-
My ancient Link 2000 has been pretty reliable for 20 something years, but recently I have an issue. I am monitoring two separate banks. voltage reading is normal for both banks; but when I read amps battery 1 is correct, but battery 2 reads 510 at all times! I can't seem to reset this function. any suggestions?
Thanks.
Click to expand
Pretty common failure mode for the ancient monitors. if a reset does not work it may be time for a new Ah counter
 
  • Like
Likes: jssailem
You must log in or register to reply here.

Top Bottom