Link 1000

[knucklehead]

Guys, I need some advice and a few suggestions:
I have a B473, 2004 with the following on board :
640 ah for the house
FSW 3000 for charger / inverter
Wind generator - silent wind
Next Generation 5.5
My Link 1000 has the following and I am not sure if is the right setup:
13.5
007
640
002
AH
A95
+004
-53.8
47.7
LOC
F01. On
F02. On
F03. 070
F04. Off
F05. Off
F06. A95
F07. 00.5
F08. 1.11
F09. 060
F10. 003
F11. On
F12. 000
F13. 000
F14. Display works
F15. A32
F16. Off


How does it look???
Karl
"Gryphon"

 

[Stu Jackson]

F06 - automatic CEF reset: see "The Gotcha Factor" for Link algorithm programming:

For everyone installing a battery monitor: The "Gotcha Algorithm" thread, a "MUST READ"

http://c34.org/bbs/index.php/topic,4922.0.html

DEFAULTS are factory settings that are made to be modified to suit your setup.

F09 - set low battery discharge floor: why not use the 100% default?

 

[knucklehead]

After reading for the umpteenth time I think I've got it.

Per your discussion, the last bit of ah is never repaid without establishing a higher parameter, ie. 15v to get to the magical maximum of 14.2v +/-.. Thanks

The other stuff will take some additional reading and assimilation. But, the intent s understood.

Again thanks for the site

Karl
"Knucklehead"