Interior wood Hunter 260

Status
Not open for further replies.
E

Esk II

.
Feb 12, 2008
60
Hunter 260 Lake Arthur
Hello to all, I bought a Hunter 260 and am cleaning her up for the season. What is the best way to shine the interior wood? I think the owners manual says to use teak oil; however the wood appears to have a varnish type finish from the factory. I have sanded the stern rail seats and will seal with teak oil. All imput will be greatly appreciated, I want to get her looking nice and clean!!
 
G

George

H260 Interior

The interior teak should have a non-gloss finish that easily adsorbs teak oil. If this is not the case the P.O. may have varnished the interior wood. For exterior such as seats and hatchboards use a good quality UV resistant varnish.
 
S

Salty Sailor

Minwas Helmsman Varnish

When I had a 260 I used MINWAX Helmsman Varnish on the stern rail seats and hatch boards. They came out beautiful and after 3 years still look great. Salty Sailor s/v Carina II
 
R

Ron

Helmsmans Varnish

On my H26, I've also had good luck with Helmsman varnish on outside seats and boards, and teak oil inside - assuming they have not had a poly coating put on by previous owner.
 
C

crazu

new flooring

Way back when, the floor was actual teak and holly sole. The manufactureres are now using a new laminent style flooring which is needs no maintenance. it does requiring removal of the old floor. Inquire with HOW chandlrey
 
E

Esk II

.
Feb 12, 2008
60
Hunter 260 Lake Arthur
Flooring 260

Hi, thank you all for the response on maintenance or interior wood. I took your advice and all looks great. One more solicitation would address the interior flooring. As stated, it is not wood, probably similar to a pergo flooring. My floor needs to regain some shine. What is the best way to acheive this task? Thank you, E. Keim
 
Status
Not open for further replies.

Top Bottom