The rains have come and water is leaking in through the forward acrylic hatch on my 1979 Hunter 30. Does anyone know the part number or where I can find a new rubber gasket?
Thanks.
Thanks.
Hunter hatches
- Thread starter justjon
- Start date
- Status
Don't know the part number but you can buy the round, gasket material by the foot from Pompanette (Bomar). You should remove a section and measure diameter and then the overall length of the opening for each hatch.
Web page below:
http://www.pompanette.com/pompweb.nsf/0/359866ffc581ed5f852567b00012d6e4?OpenDocument&ExpandView
Web page below:
http://www.pompanette.com/pompweb.nsf/0/359866ffc581ed5f852567b00012d6e4?OpenDocument&ExpandView
I replaced most all of the opening ports on my 79-30 with direct replacments from the store here.
They also sell the gasket material to replace old worn gasgets.
If in a bind you can use the rubber gaskets from the lids of some 5 gal buckets in your grey ports..
http://shop.sailboatowners.com/detail.htm?group=722&cat=2005
They also sell the gasket material to replace old worn gasgets.
If in a bind you can use the rubber gaskets from the lids of some 5 gal buckets in your grey ports..
http://shop.sailboatowners.com/detail.htm?group=722&cat=2005
My front hatch leaked on my 79 H30, I found it was around the acrylic not the seal where the hatch closes. I bought a tube of black silicone and cleaned around the edge of the acrylic applied a small bead. No more leak..
- Status