Hunter 456 cutlass bearing

[LawsonL]

I am away from my boat but would like to take the proper Cutlass bearing with me to replace it when I get there. Does anyone know the exact dimensions of a Cutlass bearing for a 2002 Hunter 456?
Thank you for your help. It saves me a big trip and extra short haul as I live almost 300 miles from the boat.

 

[Rick486]

Try here in the store. I looked and they stock them. I was unable to capture the web page.
Rick

 

[LawsonL]

I appreciate the answer and I have ordered one but the part number, 11671, does not tell me what the outside diameter is. If I knew the outside dia, I could build the tooling I need ahead of time for extracting the old bearing.
I should have been more specific with my question. I need to know the outside diameter of the cutlass bearing on a Hunter 45/450/456.

 

[Rick486]

I appreciate the answer and I have ordered one but the part number, 11671, does not tell me what the outside diameter is. If I knew the outside dia, I could build the tooling I need ahead of time for extracting the old bearing.
I should have been more specific with my question. I need to know the outside diameter of the cutlass bearing on a Hunter 45/450/456.

Have you thought about calling and asking?

 

[LawsonL]

I had time to work on it today so I was hoping for an answer before tomorrow.

 

[MitchM]

cutless bearing dimension is related to diameter of the propshaft it's installed on. know your p shaft dimension in mm, look up cutless diameter. for example my p shaft is a vetus 30 mm, so i look up my cutless and got 2 of them for about $20...

 

[sail sfbay]

Please refer to the diagram from the 456 manual for cutlass bearing size.