Hunter 410 Refrigeration amperage
- Thread starter rdavis6507
- Start date
My 2004 AC41 has the fridge at about 2.5 and the freezer at ABOUT 4.5. My manuals are 250 miles away, so I can not be more precise.
Check the web site for your brand and I bet that the details are posted.
My 40.5 reefer and freezer both run at 5 amps. They both havean air cooled condenser. Run time varies with temp. Above 90 degrees it runs 90% of the time, at 60 degrees it cycles at 50%
Here is copy from my manual:
POLAR Mate Specification - Dometic / L-Rev 20140404 /2001
Specification Measure DC Air-cooled(1) DC Air/Water(2) AC Air/Water (2)
Capacity .......................................... Btu/hr ........433 .................. 538 ...........................582
Power Consumption .........................Watt ........ 65.4 .................... 68.5 ......................... 212.8
Current Consumption (12VDC) .......Amp. ........ 5.45 .................. 5.71 .................... 1.85@115V
Current Consumption (24VDC) .......Amp. ......... 2.7 ..................... 2.9 ........................... N/A
Sound power level at one meter ......dB(A) ..........30 ...................... 30 .............................35
Displacement cu.in.(cc.) ................ 0.15 (2.5)
(1) compressor & fan
(2) compressor, fan & pump
Technical Data
Evaporating temperature: .............. -22°F to 23°F (-30°C to 5°C)
Refrigerant R-134A charge: ........... 6.0 oz. (113.4g) Polar Mate Air Cooled 12/24VDC
6.5 oz. (141.7g) Polar Mate Air/Water Cooled 12/24VDC
8.0 oz. (226.8g)Polor Mate Air/Water Cooled 115 VAC
0.5 oz. (14.2g) Polar Evap (U-shaped evaporator plates)
0.5 oz. (14.2g) Evap I (small 4-sided evaporator plate)
0.5 oz. (14.2g) Evap II (large 4-sided evaporator plate)
See data plate for charge on custom plates.
Note: Add Polar Mate charge plus evaporator plate charge for total system charge.
Refrigerant metering device: ......... capillary tube 0.025" x 10.8' (0.63 x 3550 mm)
Voltage range: ............................... 12VDC: 10.4-17.0
24VDC: 22.8-31.5
115VAC: Do not operate below 100VAC
Condensing temperature: .............. Max. 140°F (6°C) at stable conditions
Max. 158°F (70°C) at peak load
Ratings Condition
Air/Water Cooled Air Cooled
Evaporating temperature ............... 20°F (-6.7°C) ............................... 20°F (-6.7°C)
Condensing temperature ............... 100°F (37.8°C) ............................ 120°F (48.9°C)
POLAR Mate Specification - Dometic / L-Rev 20140404 /2001
Specification Measure DC Air-cooled(1) DC Air/Water(2) AC Air/Water (2)
Capacity .......................................... Btu/hr ........433 .................. 538 ...........................582
Power Consumption .........................Watt ........ 65.4 .................... 68.5 ......................... 212.8
Current Consumption (12VDC) .......Amp. ........ 5.45 .................. 5.71 .................... 1.85@115V
Current Consumption (24VDC) .......Amp. ......... 2.7 ..................... 2.9 ........................... N/A
Sound power level at one meter ......dB(A) ..........30 ...................... 30 .............................35
Displacement cu.in.(cc.) ................ 0.15 (2.5)
(1) compressor & fan
(2) compressor, fan & pump
Technical Data
Evaporating temperature: .............. -22°F to 23°F (-30°C to 5°C)
Refrigerant R-134A charge: ........... 6.0 oz. (113.4g) Polar Mate Air Cooled 12/24VDC
6.5 oz. (141.7g) Polar Mate Air/Water Cooled 12/24VDC
8.0 oz. (226.8g)Polor Mate Air/Water Cooled 115 VAC
0.5 oz. (14.2g) Polar Evap (U-shaped evaporator plates)
0.5 oz. (14.2g) Evap I (small 4-sided evaporator plate)
0.5 oz. (14.2g) Evap II (large 4-sided evaporator plate)
See data plate for charge on custom plates.
Note: Add Polar Mate charge plus evaporator plate charge for total system charge.
Refrigerant metering device: ......... capillary tube 0.025" x 10.8' (0.63 x 3550 mm)
Voltage range: ............................... 12VDC: 10.4-17.0
24VDC: 22.8-31.5
115VAC: Do not operate below 100VAC
Condensing temperature: .............. Max. 140°F (6°C) at stable conditions
Max. 158°F (70°C) at peak load
Ratings Condition
Air/Water Cooled Air Cooled
Evaporating temperature ............... 20°F (-6.7°C) ............................... 20°F (-6.7°C)
Condensing temperature ............... 100°F (37.8°C) ............................ 120°F (48.9°C)
On my 410 with a water refrigeration unit and an extra cooling fan, I consistently draw 6 amps. On start up it may jump as high as 12.