Just purchaced a 1993 Hunter 30. The toilet will not fill when set to wet pump. I assume that it has a closed seawater valve somewhere. Where is it? Please advise. Nathan
Hunter 30 Toilet Valve
- Thread starter Nathan16830
- Start date
- Status
You can find it...and you should.
Just follow the 3/4" line off the back of the toilet till you get to the thru-hull. You may lose it as it goes through a bulkhead, but it'll be the only line that looks exactly like it wherever it shows up again. You'd be wise to find and follow all your plumbing and wiring...an emergency isn't the time to START looking for things like seacocks and breakers. If the toilet is original, finding and opening the seacock may not solve the problem. If it doesn't, get back to me with the make/model/age of the toilet and we'll see what it does need.
Just follow the 3/4" line off the back of the toilet till you get to the thru-hull. You may lose it as it goes through a bulkhead, but it'll be the only line that looks exactly like it wherever it shows up again. You'd be wise to find and follow all your plumbing and wiring...an emergency isn't the time to START looking for things like seacocks and breakers. If the toilet is original, finding and opening the seacock may not solve the problem. If it doesn't, get back to me with the make/model/age of the toilet and we'll see what it does need.
Blood Sport
My valve is under the back birth directly behind the engine intake valve. For me I put my elbow on the engine intake valve reach back untill I hit something sharp (hose clamp) and there it is. Good Luck finding yours!!!!
My valve is under the back birth directly behind the engine intake valve. For me I put my elbow on the engine intake valve reach back untill I hit something sharp (hose clamp) and there it is. Good Luck finding yours!!!!
- Status