Hunter 15 centerboard pivot

[scbody]

Hi

The centerboard on my H15 came loose sometime in the last few days. After some investigation it was apparent that the stainless pivot rod, which the centerboard revolves around, had broken off the plates it was welded to. Fortunately the pivot rod was lying on the sand so had all the parts.

Looking at the plates and the pivot rod, it was clear that there was a pretty poor weld to 1/16" plate that was then ground down during manufacturing. Has anyone had the same issue and had an effective fix for it.

I'm thinking of buttressing the pivot rod by welding on some additional flanges, but I'd be really interested in what other people have done

Regards
Simon

 

[Crazy Dave Condon]

I doubt that you will hear about anything like that but I was surprised to hear it. I would suggest that you go ahead and fix and make sure no burrs and it moves freely without friction. If manufactured by Marlowe Hunter, you probably have a claim but if before Marlowe bought Hunter, there is no warranty.

 

[scbody]

Hi Dave
Thanks for the reply. I had it fixed this morning by a local machinist who welded the setup back together. His advice for the manufacturer was to make the weld bigger by using a bigger nipple and hole.
Best
Simon

 

[Crazy Dave Condon]

I use to be a dealer but now retired. I sold a couple of those boats when they came out in fiberglass