Dear Hunter Owners,
I am trying to properly tune the B&R rig on my 94' Hunter 29.5. This is an early production version of the 29.5 with double spreaders, 1/4" inner shroud, 3/16" intermediate, and 1/4 outer shroud. I'm looking for the proper percentage of 'breaking strength' for these shrouds.
The Hunter owners manual is of no use really, it says tighten the uppers and intermediates until you can't tighten them any more, without using and extension or cheater bar!
Anyway, please advise with any tips or information you may have.
Travis Martin
Lenexa, Kansas
I am trying to properly tune the B&R rig on my 94' Hunter 29.5. This is an early production version of the 29.5 with double spreaders, 1/4" inner shroud, 3/16" intermediate, and 1/4 outer shroud. I'm looking for the proper percentage of 'breaking strength' for these shrouds.
The Hunter owners manual is of no use really, it says tighten the uppers and intermediates until you can't tighten them any more, without using and extension or cheater bar!
Anyway, please advise with any tips or information you may have.
Travis Martin
Lenexa, Kansas
