I have a 1989 Catalina 30 with the tall rig and bowsprit and I need to replace all halyards and sheets. I will probably move away from the cable/rope halyard. Does anyone have a list of the specs I need for each? Thanks so much, Brett
- Status
Hi Brett, we sell Samson XLS, Trophy and LS here
http://shop.catalinaowners.com/category.htm?fno=20&cat=1601 We also carry wire/rope halyards. If you're going to switch to all rope, chances are you'll have to change the sheaves at the top of the mast. Give me a call, I'll be happy to get you set up.
http://shop.catalinaowners.com/category.htm?fno=20&cat=1601 We also carry wire/rope halyards. If you're going to switch to all rope, chances are you'll have to change the sheaves at the top of the mast. Give me a call, I'll be happy to get you set up.
Halyards
I also have a 89 Catalina 30 TRBS and have replaced all rigging a few years back. I did not have any cable/rope halyards, and the specs never called for that as I recall. I have replaced my sheaves, just for PM a few years back. Here are the specs: Main Halyard 112' 3/8", Jib Halyard 116' 3/8", Main Sheet 72' 7/16", Genoa sheet 80' 7/16", Jib Sheet 70' 7/16", Topping Lift 7 x 19, 1/8 x 32', Topping Lift Tail 5/16" x 20'. If you are going to replace the Sheaves contact Garhauer. If you want further information or other specs feel free to contact me off line at jaffew@welchallyn.com
I also have a 89 Catalina 30 TRBS and have replaced all rigging a few years back. I did not have any cable/rope halyards, and the specs never called for that as I recall. I have replaced my sheaves, just for PM a few years back. Here are the specs: Main Halyard 112' 3/8", Jib Halyard 116' 3/8", Main Sheet 72' 7/16", Genoa sheet 80' 7/16", Jib Sheet 70' 7/16", Topping Lift 7 x 19, 1/8 x 32', Topping Lift Tail 5/16" x 20'. If you are going to replace the Sheaves contact Garhauer. If you want further information or other specs feel free to contact me off line at jaffew@welchallyn.com
- Status