I put my 34 in the same position on the cradle every year, but it seems to me to have excessive overhang at the stern. Could someone measure the distance from the back of the keel to the rear support of his cradle and tell me what the distance is?
Ed We have a 34 shoal draft in mpls. I was down their recarpeting the v berth today and took the following measurements for you. Where the keel meets the bottom of the boat. There is a small indent about two inches below the bottom of the boat on the keel and thats where I measured from. 60 inches to center of rear support pads. From aft bottom of boat to center of rear support pads. 88 inches. Hope this helps. email me at shavdog@aol.com if you need further explanantion. Craig
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
