H25 Companionway Hatch Boards

Status
Not open for further replies.
I

Ike Cook

Was wondering if anybody knew the dimensions of the hatch boards on a 1974 H25. Complete with the routered edge dim. (I think it's a 1/2" router). If I knew the bottom edge of the first board and the top edge from the last board, the rest would speak for itself. I'd like to make new ones, but the boat is 4 hrs away, and my trip this weekend has been cancelled. Thanks in advance. Ike
 
Rick

Rick

.
Oct 5, 2004
1,098
Hunter 420 Passage San Diego
I'll measure mine

I'll measure mine today. I have a 1974 model. Newer models have a different deck so I don't know if the hatch boards will be the same.
 
D

Don

Horrible hatch article

Ike, Have you seen the article on hatch board construction in "good Old Boat"...November issue? If not, and you'd like to, e-mail me and I'll send it over. Don sailbode@gis.net
 
Rick

Rick

.
Oct 5, 2004
1,098
Hunter 420 Passage San Diego
Ike

I took a look at my hatch boards and its a little more complicated than a simple top and bottom measure. I think yo should have your old boards in hand to duplicate. Good luck. Rick
 
Status
Not open for further replies.

Top Bottom