H23.5 Rudder

[Arturo DeVitalis]

In Replacing The Rudder Shims I Took A Close Look At How The Line For Raising/lowering The Rudder Was Routed. My Manual Doesn't Show The Routing And I Would Like Some Help, Perhaps With A Sketch, To See How That Line Came From The Factory.
Tia

 

[Ed in Waukegan]

In the Owner's Manual

Arturo, My owner's manual shows the rudder detail on diagram H23-A-2614. It's not the best detail but you can make out the routing. The diagram shows a sheave between the two plates that the uphaul and downhaul lines go around in opposite directions. Uphaul is under and then up forward of the sheave, downhaul is under and then up aft of the sheave.