H-340 110 breakers to outlets

Status
Not open for further replies.
Jun 1, 2011
5
Hunter 340 Punta Gorda, FL
With shore power on, 110 switch on and showing 110 volts, the switch that activates the outlets and microwave will not allow current flow either in shore power mode or in inverter mode.

I have checked the GFIs and looking for help. New boat to me so not familiar with any other fuses/breakers to check.

Any thoughts/help would be appreciated.
 
Sep 25, 2008
7,342
Alden 50 Sarasota, Florida
could be as simple as a bad breaker. Check voltage at the breaker to be sure. If you have power on the breaker output side, it must be a GFI or bad connection somewhere down the chain.
 
Jun 4, 2004
834
Hunter 340 Forked River, NJ
GFI

On my 2000 H340 the GFI in the galley - under the upper cabinet and behind the refrigerator box - controls many of the other AC outlets on the port side. It also seems trip easily, such as when switching on a fan. I'd have to check, but I think the starboard side outlets are controlled by the GFI at the nav station.
 
Jun 1, 2011
5
Hunter 340 Punta Gorda, FL
On my 2000 H340 the GFI in the galley - under the upper cabinet and behind the refrigerator box - controls many of the other AC outlets on the port side. It also seems trip easily, such as when switching on a fan. I'd have to check, but I think the starboard side outlets are controlled by the GFI at the nav station.
Hello and thanks,
The refrig has been removed on my H-340. I have found 3 GFI boxes: one in the galley, one in the head, and one by the nav station. The microwave must be plugged in somewhere but I have not been able to find that outlet.
H-340 Punta Gorda, FL
 
Jun 1, 2011
5
Hunter 340 Punta Gorda, FL
Hello and thanks,
The refrig has been removed on my H-340. I have found 3 GFI boxes: one in the galley, one in the head, and one by the nav station. The microwave must be plugged in somewhere but I have not been able to find that outlet.
H-340 Punta Gorda, FL
Also, the double breaker switch does not show red LEDs when turned on in either shore power or inverter mode, so I am thinking it is probably a problem with the breaker itself. I am going to check now.
Thanks for all the help.
 
Status
Not open for further replies.