H-26 Porta-Potty Anchor Screws-Aluminum Plate?

[BrianW]

Quick question: Is there an embedded aluminum plate in the sole for the Porta-Potty anchor screws? My existing screws stripped out and I need to replace with next larger size. Thanks, BrianW

 

[BrianW]

I spoke with Crazy Dave on the phone. He advised that there was no aluminum plate under the Porta-Potty. He advised using one size larger wood screw to anchor the brackets. Thanks CDC! BrianW

 

[Rick Webb]

Should Go Without Saying

Be careful how long your new screw is.

A while back there was more than one poster who had the screws from the bracket go into the ballast tank.

 

[BrianW]

Thanks Rick! Just using 1/2" long screws. I gauged the ballast tank below with with an ice pick. I've got at least another 1/2" to spare. BrianW

 

[BrianW]

Just for the record...... are the only stock locations over the ballast tank that uses screws the Porta-Potty and the bilge pump? BrianW

 

[Crazy Dave Condon]

Good talking with you Brian and feel free to call anytime. In three months, email me at my personal email and I will give you the new address in the VA mountains.

dave condon