What are the dimensions and brand name of a 12 gallon gas tank that will fit the gas tank compartment of my 26x? Where can I get it, web address?
gas tanks for 26x
- Thread starter Nomad17046
- Start date
- Status
- Not open for further replies.
here ya go!
From what I understand, these will go in relatively easily. you my have to open the sides of the compartment a little bit. click the link.
From what I understand, these will go in relatively easily. you my have to open the sides of the compartment a little bit. click the link.
B
BT - 26X w/ 90 TLDI...goes fast!
J
JonBill
B
BT
90 on an x
love it. installed in Oct'04. with the '02 suzy 50hp trade in, it cost me $3.5K, but I couldn't be happier. was looking at the new evinrude 90 etec, but more expensive ($1K more) and (at the time) hard to get. my mac really goes now. it is as quiet and smooth as the suzy 4 stroke. very impressive.
love it. installed in Oct'04. with the '02 suzy 50hp trade in, it cost me $3.5K, but I couldn't be happier. was looking at the new evinrude 90 etec, but more expensive ($1K more) and (at the time) hard to get. my mac really goes now. it is as quiet and smooth as the suzy 4 stroke. very impressive.
J
JonBill
BT - Is that a Tohatsu/Nissan 90 TLDI?
I've got the Tohatsu 90 TLDI on my M boat. I really like it too. What size prop do you run? I've got a 14x11 and it turns 5400 RPM no ballast 5000-5200 with ballast. Had some challenge getting it proped right but finally go it. Am thinking about trying a 13.25x13 or 14. Sure am interested to know what size prop you are running and how many RPM you are turning. Thanks, JonBill
I've got the Tohatsu 90 TLDI on my M boat. I really like it too. What size prop do you run? I've got a 14x11 and it turns 5400 RPM no ballast 5000-5200 with ballast. Had some challenge getting it proped right but finally go it. Am thinking about trying a 13.25x13 or 14. Sure am interested to know what size prop you are running and how many RPM you are turning. Thanks, JonBill
B
BT
90 on an x
Quicksilver 14 X 11 pitch is a must! has big ears for max surface coverage. also has the best hub. i'm at 5800 rpm lightly loaded. http://www.propline.com/Select-Boat-Props-By-Brand/Quicksilver/Black-Diamond/Tohatsu_Nissan_Outboards/70_140.htm also here's the best price for a stainless with same dimensions. http://www.acepropeller.com/
Quicksilver 14 X 11 pitch is a must! has big ears for max surface coverage. also has the best hub. i'm at 5800 rpm lightly loaded. http://www.propline.com/Select-Boat-Props-By-Brand/Quicksilver/Black-Diamond/Tohatsu_Nissan_Outboards/70_140.htm also here's the best price for a stainless with same dimensions. http://www.acepropeller.com/
J
JonBill
BT - Please Email Me
BT, Please email me so we can compare notes off the board. I have the same outboard you have on an M boat and had some questions for you on your engine set up and general preformance experience if you don't mind. My email is jonbill1@yahoo.com Kindest Regards, JonBill
BT, Please email me so we can compare notes off the board. I have the same outboard you have on an M boat and had some questions for you on your engine set up and general preformance experience if you don't mind. My email is jonbill1@yahoo.com Kindest Regards, JonBill
C
cbn_soul
fuel tanks
i used a tempo low profile 12 and installed 2 deck plates to fill the tanks, then installed a three way fuel valve for easy switch over.
i used a tempo low profile 12 and installed 2 deck plates to fill the tanks, then installed a three way fuel valve for easy switch over.
B
BT
- Status
- Not open for further replies.