Front hatch holder pins

Status
Not open for further replies.

KennyH

.
Apr 10, 2007
148
Hunter 25 Elizabeth City NC
1981 Hunter 25 with original front hatch. Seems to have pins to attach the prop rod to the hatch itself. This is the rod that holds the hatch open. I need to replace one of the rods so I would be interested if anyone has done this and the proper procedure to remove the pins. Tried to pull them out with plyers with no success.
 
Dec 23, 2003
61
Hunter 36_80-82 Gulfport, MS
Maybe Bomar/Gray

Hatch may be Bomar/Gray like the portlights on the Cherubini hunters. The source is Pompanette with a very helpful website. The Bomar/Gray portlight "dogs" are tapered pins that have to be pressed or 'lightly' hammered out using a finish nail of smaller OD. GUD LUK The page I linked goes to the hatch parts. http://www.pompanette.com/pompweb.nsf/731d6514ff5a8481852567be000745b2/a594d67364fe8439852567c5000f8a35?OpenDocument
 
Dec 23, 2003
61
Hunter 36_80-82 Gulfport, MS
Maybe Bomar/Gray

Hatch may be Bomar/Gray like the portlights on the Cherubini hunters. The source is Pompanette with a very helpful website. The Bomar/Gray portlight "dogs" are tapered pins that have to be pressed or 'lightly' hammered out using a finish nail of smaller OD. GUD LUK The page I linked goes to the hatch parts. http://www.pompanette.com/pompweb.nsf/731d6514ff5a8481852567be000745b2/a594d67364fe8439852567c5000f8a35?OpenDocument
 
Status
Not open for further replies.