I've got an 87 Hunter 34 the water tank under the port settee has a leaking crack. Any ideas on where to find a replacement tank? Would replacing it with a bladder be a good idea?
Fresh Water Tank Question
- Thread starter andy2518
- Start date
- Status
I don't know who made the tank, Andy. There were some posts on the same subject last year, I think..
The fuel tank was made by Inca Marine Products of Nashville..
http://www.incaproducts.com/site/marine_watertanks.aspx
I don't know if they made the water tanks as well.. might be worth a call.. Let us know ..
EDIT; a previous post:http://forums.hunter.sailboatowners.com/showthread.php?p=201995&highlight=Water Tank
It is possible to take it to a plastic fabricator and have it plastic welded . Then when ya go back in, support that big inboard slab side with polyfoam or something like that..
The fuel tank was made by Inca Marine Products of Nashville..
http://www.incaproducts.com/site/marine_watertanks.aspx
I don't know if they made the water tanks as well.. might be worth a call.. Let us know ..
EDIT; a previous post:http://forums.hunter.sailboatowners.com/showthread.php?p=201995&highlight=Water Tank
It is possible to take it to a plastic fabricator and have it plastic welded . Then when ya go back in, support that big inboard slab side with polyfoam or something like that..
Last edited:
Andy...
If you can't get a tank from Inca, you may need to resort to Todd's offerings. Check this site store first, then WM or Defender if they don't have any available.
If you can't get a tank from Inca, you may need to resort to Todd's offerings. Check this site store first, then WM or Defender if they don't have any available.
I called, they will not sell direct. Can I get a replacment tank throught you? Rough price estimate?
I'll send this to Phil (Forum Administrator/owner), we'll make another run at Inca, but I believe they only make aluminum tanks, if you can accommodate another 3.5 inches in length in the space, a Ronco roto-molded tank would sure be a better option.
- Status