Forestay diameter on 1979 Hunter 30

R

Robert1224

.
Jan 22, 2008
99
Hunter 30_74-83 Rochester, New York (Lake Ontario)
Ahoy,
I am pricing out roller furlers and won't drop my mast for another six weeks. Does anyone happen to know the diameter of the forestay on a 1979 Hunter 30. Also, I am strongly considering a ProFurl C290. Any any opinions on this furling unit?
Thanks,
Bob
 
ggrizzard

ggrizzard

.
May 27, 2004
2,048
Hunter 30_74-83 Ponce Inlet FL
I know you'd like an answer ASAP...
I won't be at the boat until the Labor day madness subsides, but if you don't get an answer by Tuesday, I'll get my calipers and measure.
 
R

Robert1224

.
Jan 22, 2008
99
Hunter 30_74-83 Rochester, New York (Lake Ontario)
Thank you! That would be great, or whenever you can get to it. I plan on hauling out mid October. That is the earliest I can get the calipers on mine. Have a great holiday weekend.
Bob
 
ggrizzard

ggrizzard

.
May 27, 2004
2,048
Hunter 30_74-83 Ponce Inlet FL
Robert, I apologize. :redface:

I was just starting an electrical project when you first posted and ...
It got more complicated over the weekend. And, I'm old!
And I didn't write myself a note. :banghead: Did I mention I'm old?
So, I've written the note.
I'll post tomorrow. :rolleyes:
(now, what was it he needed to know?) :doh:
 
Last edited:
ggrizzard

ggrizzard

.
May 27, 2004
2,048
Hunter 30_74-83 Ponce Inlet FL
All my stays /shrouds are 6mm - 1/4 in.
They were replaced 4 years ago for the second time.
Sorry for the delay.
Good luck with your refit.
 
R

Robert1224

.
Jan 22, 2008
99
Hunter 30_74-83 Rochester, New York (Lake Ontario)
Thank you very much for the information. I'm certainly looking forward to a Pro-Furl C290 in place of my unknown (possible original hope it works model) Have a great remainder of the sailing season.
Cheers!
 
You must log in or register to reply here.

Top Bottom