Engine control display - replace Teleflex one

[Gianni65]

Hello.

on my H50 2007 a Teleflex display is installed at the port helm and I would like to replace with a new one.

I've in the radar these options but not sure if they are compatible with the signals received by the current unit:

* Yanmar YD42 ( YD42 - YANMAR Marine International)
* Mareton DMS410 (Maretron | DSM410)

Other options and suggestions are welcome and thanks for any consideration on this requesto for help.

Warmest regards,

G

 

[artboas]

Hello.

on my H50 2007 a Teleflex display is installed at the port helm and I would like to replace with a new one.

I've in the radar these options but not sure if they are compatible with the signals received by the current unit:

* Yanmar YD42 ( YD42 - YANMAR Marine International)
* Mareton DMS410 (Maretron | DSM410)

Other options and suggestions are welcome and thanks for any consideration on this requesto for help.

Warmest regards,

G

I guess the question is, why do you want to go with a Maretron / Teleflex?
All of the data can be displayed on the raymarine i70.
I assumed you’ve hooked up your chart plotter to the Teleflex n2K? That way all your engine data is on the cockpit chart plotter
You can pm me for more detail