Engine Combi removal

[John Nielsen]

I want to take out my 022 gas engine and combi unit. I see references
to instructions for disconnecting the gearbox (it is locked up)and
taking out the engine but haven't found the instructions. Any
instructions/photos/words of wisdom would be appreciated.

Thanks, John

 

[wxt8981]

Hi John;
it's not all that difficult. Open the left door from the
engine (where the shaft gets in) and unscrew the two bolt
holding the shaft. (basically you've disconnected the
shaft+ everything else from the engine)
Now you must open the (large) nut in front of the gear-box
(this nut holds the sleeve with the use of 2 pressure
rings).Basically you should be done, the shaft and sleeve
should come out (back)
Wilhelm, V-257