Drive/prop shafts

Status
Not open for further replies.
B

Brian

I am trying to locate a 1" x 49" drive (or is it called a prop shaft?) shaft for a hunter 30. I have searched the internet and have had no luck, I must confess I'm not the best at this stuff. Any help would be appreciated.
 
J

Jim Arthur

Are you on the east coast?

If you are in the Chesapeake Bay area, try Ocran Boat Shop in White Stone Virginia, phone (804) 435-6305. He will make a shaft to your dimensions. He made a 1" x 44" shaft for my '79 Hunter 30. I re-engined with a BetaMarine BD722, thus the length difference. I don't know if he will ship to you, but it may be worth a call.
 
Dec 2, 1999
15,184
Hunter Vision-36 Rio Vista, CA.
most prop shops and marina yards do this too.

Brian: You may want to check with your local prop shop or marina yards. They make these things up custom to your required specs.
 
D

David

Brian

If you have the old shaft take it to the prop shop, if not ask them how the measure. Most shops measure from the coupler to the beginning of the taper not the whole shaft.
 
Jan 22, 2008
275
Hunter 33_77-83 Lake Lanier GA
I just replaced mine .....

with a new S.S. 1x49 from General Propeller. Kevin Arrant was my contact and he was fantastic to work with.. 1-800-282-3181 Tell him a customer sent you.. David Underwood I also replaced my 2 blade prop with a 3 blade one from these guys. Great service and fast shipping. Good luck.
 
Status
Not open for further replies.